Pro-Tatch Hydraulic Wire Winder

Pro-Tatch Hydraulic Wire Winder

Rugged construction, ease of use and superior performance have made Pro-Tatch® the best selling wire winder on the market. The Pro-Tatch hydraulic wire winder is 100% Full-Satisfaction Guaranteed. 

The Pro-Tatch wire winder can be mounted and operated by one person. To wind, just park your vehicle, tie a weight on far end of wire to prevent recoil (a short length of chain works well), and pull wire toward you. When the reel is full, tie the roll with 4 retainer wires held by pre-drilled holes at the edges of the reel. The reel splits easily by spinning the nut off the 1" shaft, and the roll lifts away without binding. To unwind wire, tie wire to a post, set your vehicle's hydraulic control lever to the "float" position and drive forward to unwind.

A ball valve provides infinitely variable speed control. The smooth-operating valve allows you to easily select any rotational speed from fast down to creep, as well as completely stopped. The wire winder's hydraulic motor provides ample power for hard jobs like pulling barbed wire through tall grass or vines. Even the heaviest underbrush is no match for the Pro-Tatch winder.

The winder rolls barbed or smooth wire, light cable, hose, tubing, rope or similar materials. Holds 1/2 mile of barbed wire or 1 mile of smooth wire. (Click here if you need a larger winder.)

The 20" diameter, 12 gauge steel wire winder drum is virtually indestructible, and mounts on a heavy duty frame constructed of 11 gauge, 3" square tube. Long life, replaceable, moly-impregnated poly bushings prevent wear to steel parts.

After wire has been rolled up on the Pro-Tatch winder, it can easily be put back on the spool for unwinding. Just put your hydraulic lever in "float" position and drive... the circulation of hydraulic fluid through the motor provides perfect resistance to keep the reel from overspinning. If you're using a skid steer loader without a hydraulic "float" position, you can connect the Pro-Tatch's two hose ends together (using your own adapter) for the same effect.

The Pro-Tatch winder can be purchased with a 3/8"-thick 16"x16" steel plate Universal Mount or a quick-tatch mount for 3-point tractor hitches for Category I, Cat. II, or Cat. III Narrow. The 3-point tractor hitch mount models WW-174 (SKU: FGJXX for Cat. I and II and SKU: PNT38 for Cat. III) and WW-175 (SKU: 2KQXA for Magnum Cat. I and II and SKU: XRXNW for Magnum Cat. III) can easily be converted to fit a Cat. 1, 2 or 3 Narrow by simply changing the bottom pin size and configuration - pins will either face inward or outward on the mount frame. Both models include 7/8" and 1-1/8" pins.

Note: Questions on what category you might need? Cat. 1: Up to 65HP tractors. Pin size 7/8". Cat. II: 65HP to 125HP tractors. Pin size 1-1/8". Cat. III Narrow: 125HP to 200HP tractors. Pin size 1-1/8". This can vary depending on tractor manufacturer but in most cases will be accurate for what you need.

The Pro-Tatch works fine as a wire winder, cable roller, wire rope winder. Will roll up almost any kind of cable or wire, including high tensile wire.

Purchase price includes shipping to any U.S. address except Alaska and Hawaii.

Includes frame, reel, hydraulic motor, valve and hoses. Just add your style of hose ends and you're ready to roll wire.

Simplified Detail Drawing of Pro-Tatch Hydraulic Wire Winder

Buy Now, Pay Later with PayPal
	Payment plans of 12 to 24 months, with full details available in checkout.

Custom mount fabrication is available: Call or fax your individual requirements, for a price quote.

Do you need a gasoline engine powered winder? We have that too… click here!

Did we forget something? If you need more information about this product, please tell us what else you'd like to know with a quick email or live chat!